Corrugated Glue Kitchen

750–1,650 kg

Glue Production Volume

30 min

Glue Making Time

PLC

Automatic Control

Automatic corrugated glue kitchen
Chat on WhatsApp

What Is a Glue Kitchen?

The corrugated glue kitchen, also known as a starch kitchen, is a set of equipment used in a corrugated board production line to prepare, store, and supply starch adhesive. It does not produce corrugated board directly. Instead, it supplies adhesive to different bonding sections of the production line.

During corrugated board production, the single facer and double backer are the main units that use starch adhesive. At the single facer, the adhesive bonds the corrugated medium to a linerboard to form single-faced corrugated board. At the double backer, another linerboard is bonded to the exposed flute tips to produce double-faced corrugated board.

AGICO PAPER offers the glue kitchen for corrugated board production. We can also offer relevant glue kitchen equipment based on customers' corrugator line configurations.

Main Configurations of AGICO Corrugated Glue Kitchen

The glue kitchen used in a corrugated board production line is not a single machine. It is a system made up of several functional units. These units work together to supply raw materials, prepare, store, and transport starch glue for the corrugated board production line. Looking at the working process, the corrugated glue kitchen includes a raw material storage and supply system, a glue preparation and mixing system, a glue storage system, a glue supply system, and a PLC control system.

Raw material storage and supply system

Raw Material Storage and Supply System

The raw material storage and supply system mainly includes a starch storage tank, a lye storage tank, and a lye transfer tank. These tanks are used to store and supply the raw materials needed for starch glue preparation. The starch storage tank is equipped with a level sensor. When the remaining starch drops to the preset low level, the system sends an alarm to remind operators to refill the tank in time.

Starch glue mixing tank

Glue Preparation and Mixing System

This system is used to prepare the starch glue needed for corrugated board production. Operators can set the amount of each raw material in the control program in advance. The PLC controls the measurement and addition of raw materials. It can also select the corresponding glue formula according to different glue application points and complete the mixing according to the preset raw material proportions. Each batch of glue takes about 30 minutes to prepare.

Starch glue storage tanks

Glue Storage System

The glue storage system mainly consists of storage tanks installed at different glue application points. This system is used to store starch glue and provide a supply of glue for the corrugated board production line. Each storage tank is equipped with a level sensor. The PLC monitors the glue level in each tank in real time. When the level in a storage tank drops below the preset value, the system selects the corresponding glue formula based on the glue application point. It then arranges the preparation of the next batch of glue to meet the needs of production.

Starch glue supply system

Glue Supply System

This system uses pneumatic diaphragm pumps to transport the prepared starch glue. The prepared glue is transported through pipelines to the storage tanks at different glue application points on the corrugated board production line. This provides the glue needed for the following gluing processes.

PLC control system

PLC Control System

The PLC control system controls the operation of the entire glue kitchen and monitors its operating status. Operators can set the raw material amounts, glue formulas, and mixing time through the control program. The system controls raw material measurement, addition, and glue preparation according to these settings. After glue transportation is completed, the equipment can also automatically clean the storage tanks according to the preset program.

Key Advantages of AGICO's Corrugated Glue Kitchen

Reduced Manual Operation

The raw material metering and feeding are controlled by the PLC control system according to the preset program. This can reduce manual weighing and mixing work. When the liquid level in the lye transfer tank drops below the preset value, the system automatically starts the pump to refill the tank. The tanks can also be cleaned automatically according to the preset program. It helps you reduce manual work in daily operation.

Provide High-Quality Glue

Our system can choose the corresponding glue formula according to different glue application points. This helps match the glue formula to the needs of each glue application point.

This system does not add stabilizer when preparing starch glue, because it makes glue with good penetration and stability. Good glue penetration helps form a strong bond between the corrugated medium and linerboard.

Avoid Material Shortage

The starch storage tank is equipped with a level sensor. When the remaining starch drops to the preset level, the system automatically sends an alarm to remind operators to refill the raw material in time. This helps reduce the risk of glue preparation being affected by insufficient starch.

Specifications of Corrugated Starch Kitchen

Water source pressure 5-6kgf/m2
Compressed air pressure 4-7 kgf/m2
Maximum compressed air consumption 105m3/h
Viscosity Change within ±2s
Pasting temperature Change within ±1℃
Time to make glue 30min
Maximum production volume 1650kg
Minimum production volume 750kg
Working power 380V 50Hz 32KW

Discuss Your Glue Kitchen Requirements

Chat on WhatsApp

Working Process of Corrugated Glue Kitchen

The corrugated glue kitchen uses carrier adhesive and main starch slurry for preparation and mixing, then produces the starch glue for corrugated board production. The finished glue passes through storage and is then transported to different glue application points on the corrugated board production line.

Swipe or scroll horizontally to view the full process diagram.

Corrugated glue kitchen working process

1. Raw Material Preparation

Prepare the raw materials needed for glue production, including starch, water, caustic soda solution, and borax. According to the preset glue formula, decide the amount of each material. Do a good job of preparing the materials for making glue.

2. Carrier Adhesive Preparation

Mix starch and water, add caustic soda solution, and stir the mixture. At a certain temperature, part of the starch undergoes gelatinization. This forms carrier adhesive with a certain viscosity.

3. Main Starch Slurry Preparation

Mix the remaining starch. Add water and stir thoroughly to form a starch suspension. At this stage, the starch granules remain ungelatinized. Add borax and other auxiliary materials according to the preset formula.

4. Glue Mixing

Gradually add the carrier adhesive into the main starch slurry. Continue stirring to mix the two parts thoroughly and form uniform starch glue.

5. Storage and Supply Glue

After mixing, the starch glue needed for corrugated board production is ready. The finished glue is transported to the glue storage tanks for storage. Then it is supplied to different glue application points, such as the single facer and double facer, according to production needs.

Applications of Corrugated Glue Kitchen

The corrugated glue kitchen produces starch glue for the two gluing processes in corrugated board production. The corrugator line applies starch glue at different positions to help bond the corrugated medium and linerboard together.

Starch glue application at the single facer

Single Facer

Starch glue is applied to the flute tips of the corrugated medium. The corrugated medium is then bonded with a layer of linerboard to form single-face corrugated board.

Starch glue application at the double facer

Double Facer

Starch glue is applied to the exposed flute tips on the other side of the single-face corrugated board. It is then bonded with another layer of linerboard to form single-wall corrugated board.

Why Choose AGICO PAPER

Corrugated machinery customer communication

Offer Pre-Sales Support

When customers send us an equipment inquiry, we communicate with them promptly to understand their specific purchasing needs and production requirements. For questions from customers, we promptly collect and confirm the relevant information. For technical questions that need further confirmation, AGICO PAPER communicates with the relevant engineers before giving a reply. We actively help customers clarify their equipment purchasing needs.

Corrugated machinery installation guidance

Provide Installation Guidance

After customers buy the equipment, we will provide technical documents such as equipment manuals, operation manuals, and electrical drawings. To better help our customers install the equipment, AGICO PAPER also offers video guidance to help customers complete the installation.

Corrugated board production line

Rich Corrugated Industry Experience

AGICO PAPER has long focused on corrugated board production equipment. We are familiar with the main processes in corrugated board production and the matching requirements between different machines. For the glue kitchen, we understand its role in the corrugated board production line and the glue requirements of equipment such as the single facer and double facer. This experience helps us consider the glue kitchen configuration and glue supply requirements from the perspective of the entire production line.

FAQ

  1. 1.Which raw materials are needed for a corrugated glue kitchen?

    Making starch glue usually needs raw materials such as starch, water, caustic soda solution (NaOH), and borax.

  2. 2.How long does it take to make starch glue in a corrugated glue kitchen?

    It takes about 30 minutes to prepare one batch of starch glue. The glue-making process is controlled by the system according to the preset parameters.

  3. 3.What information is needed for a corrugated glue kitchen quotation?

    For a suitable configuration and quote, AGICO PAPER suggests providing the working width, designed speed, board plies, glue application points, and factory requirements. For an existing corrugated line, please also provide its configuration details.

PLAN YOUR EQUIPMENT

Tell us what you want to produce

Complete the form with your contact details and equipment requirements. Use the message field to share the points below.

  1. Equipment you need

    A complete production line, an individual machine, or an upgrade to your existing equipment.

  2. Your product specifications

    Board ply and flute type, working width, box dimensions, or printing and converting requirements, where known.

  3. Output and project details

    Your target production capacity, installation country, and any workshop space or project requirements.

Not sure which machine to choose? Describe your product and what you want to achieve. Share the details you know to get started.

Your equipment requirements

All four fields are required.Your inquiry will be submitted securely to our company inquiry system. Privacy information.

Your equipment requirements

Name, email and message are required. Phone / WhatsApp is optional.Your inquiry will be submitted securely to our company inquiry system. Privacy information.